ATOS ScanBox Series 6 - 3D Measuring Machine

ATOS ScanBox Series 6

In the production environment, it is important to identify, analyze and eliminate quality problems as fast as possible. For that, as many parts as possible have to be completely checked in the shortest amount of time to be able to initiate targeted corrective measures at short notice and to minimize scrap. Master this challenge with ATOS ScanBox Series 6: Two different variants provide fully automatic surface deviations between the complete 3D actual coordinates and the CAD data in the shortest possible time.

Key Highlights

  • Optimized Workflow
  • Integration
  • Virtual Measuring Room
atos-scanbox-series-6-image

Optimized Workflow

Provision of additional measurement data in the shortest possible time

With the optical 3D measuring machine ATOS ScanBox 6235, you can increase your throughput – thanks to two working areas that can be operated independently of each other. You can place your parts, such as doors, tailgates or battery modules with a size of up to 3500 mm and a maximum weight of 5000 kg, in both working areas or on the rotation tables. Both working areas are operated safely due to the automatic doors.

Optimized planning for efficient workflows

The entry areas are constructed very wide and allow an uncomplicated use of loading machines such as cranes, forklift trucks or pallet trucks. Hang-on parts can be measured more quickly with ATOS ScanBox 6135 and 6235 with a multi-part fixture, as it is not necessary to change the measuring fixture. The multi-part fixture can be easily positioned via the Human Machine Interface (HMI), allowing the hangon parts to be changed from the front.

scanbox-6-efficient-workflow

Integration with ATOS Systems

scanbox-6-high-speed

High-speed scanning with ATOS 5

Due to its advanced camera technology, a powerful light source and high-performance software, ATOS 5 achieves a new level of performance, especially when measuring shiny and dark surfaces, fine structures and edges. The technology accelerates the total measuring time, while providing precise 3D measurement data at the same time. ATOS 5X uses the integrated Laser Light Compressor to generate ultra-bright light. This enables measuring fields of up to 1000 mm with very short exposure times.

Virtual Measuring Room

scanbox-6-vmr

The virtual measuring room (VMR) is the central control and measurement planning software for all elements of the optical 3D measuring machine. It offers the functional representation of a real measurement environment in a virtual simulation. The VMR consists of a robot with a sensor, the programming, including the kinematics of the robot paths, the part and the measurement plan. Thanks to the VMR, the user can work with the system without requiring specific robot programming skills. All robot movements are simulated and checked for safety in the virtual measuring room before execution.

Specifications

ATOS ScanBox 6135
atos-scanbox-6135
ATOS ScanBox 6135 was designed for the quality assurance of large and heavy workpieces, such as cast parts, hang-on parts or tools with a size of up to 3500 mm.
Benefits
  • Numerous loading options
  • Acquisition of all inspection features and functional dimensions
ATOS ScanBox 6235
A special feature of the ATOS ScanBox 6235 are the two working areas, which can be operated independently from each other and thus deliver even more precise measurement results in the shortest possible time.
Benefits
  • Higher throughput thanks to two working areas
  • Measuring hang-on parts without changing the measuring fixtures

Technical Data

ATOS ScanBox 6135ATOS ScanBox 6235
Dimensions4500 x 4500 x 3250 mm7665 x 4500 x 3250 mm
Power supply200-500 V (3-phase, 32A)200-500 V (3-phase, 32A)
Max. part sizeØ 3500 mm2 x Ø 3500 mm
Max. part weight5000 kg2 x 5000 kg
Opening width2850 mm2850 mm
Sensor compatibilityATOS 5, ATOS 5XATOS 5, ATOS 5X